Using Contacts - Samsung M300 User Manual

Using Contacts

Contacts allows you to retrieve contact information for any entry saved in
your Contacts list by saying the full name of the person.
To retrieve information using Contacts command:
1.
Activate voice recognition by pressing and holding
will prompt you for a command.)
2.
Say "Contacts." (The phone will prompt you to say the name.)
3.
Say the full name of the person, exactly as it is entered in your
Contacts list. (The phone will play the name it recognized through
the earpiece, and then open the contact information for that name.)
Enabling or Disabling Contacts Choice Lists
You can customize whether the Contacts feature displays a list of choices
for names that sound alike, or brings up information for the first recognized
name without displaying a choice list.
To enable or disable choice lists for the Contacts command:
1.
Select Menu > Voice Kit > Voice Service.
2.
Select Settings (
3.
Select Choice Lists and press
4.
Select Contacts and press
5.
Select Automatic, Always On, or Always Off and press
(When choice lists are enabled for contacts, after you say the name,
the phone will display one or more names on the screen and prompt
you to confirm the name you spoke.)
If the phone says, "Did you say," followed by the correct name,
say "Yes."
If the phone says, "Did you say," followed by an incorrect
name, say "No." The phone then prompts you with the next
name, if there is one. If there are no more names, the phone
will say "Sorry, no match found."
).
Section 2H: Using Your Phone's Voice Services
.
MENU
OK
.
MENU
OK
. (The phone
.
MENU
OK
119