Switching Temporarily To Touch Tone Dialling (Dtmf) - Siemens GIGASET A580 User Manual

Operating the base station on the PABX
Changing the pause after the recall key
You can change the length of the pause if your PABX requires this (refer to the
user guide for your PABX).
M 4 O
§Menu§
~

Switching temporarily to touch tone dialling (DTMF)

If your PABX still operates with dial pulsing (DP), but you need touch tone dial-
ling for a connection (e.g. to listen to the network mailbox for your fixed line
network connection), you must switch to touch tone dialling for the call.
Precondition: You are currently conducting an external call via the fixed line
network or you have dialled an external fixed line network number or an exter-
nal call is signalled.
§Menu§
Tone dialling
Touch tone dialling is now activated for this call only.
102
Enter a number for the length of the pause (1 = 1 sec.; 2 = 2 sec.;
3 = 3 sec.; 4 = 6 sec.) and press
Open menu.
Select and press
§OK§
.
§OK§
.