D-Link DIR-620 Quick Installation Manual page 10

Multifunction wireless router supporting gsm, cdma, wimax with built-in 4-port switch

Hide thumbs Also See for DIR-620:

Table of Contents

DIR-620

Connection via WiMAX network

If you want the router to connect to the Internet via a WiMAX USB modem

automatically after turning on, follow the steps below:

1. Proceed to the Net > Network interfaces page.

2. Follow the WIMAX link.

3. Select an interface type according to data of your WiMAX operator

(Static, DHCP, or PPPoE). If you have selected the Static type,

specify the needed settings.

4. Select the Auto choice of the Start radio button to enable automatic start

of the WIMAX interface upon turning on of the router.

5. Click the Change button.

6. On the Net > Network interfaces page, follow the WAN link.

7. Select the Manual choice of the Start radio button to disable automatic

start of the WAN interface upon turning on of the router.

8. Click the Change button.

Connection via CDMA or GSM Network

If you want the router to connect to the Internet via a CDMA or GSM USB

modem automatically after turning on, follow the steps below:

1. Proceed to the USB modem > Information page.

2. Select a value corresponding to the network type you want to use from

the Enable USB modem drop-down list.

Quick Installation Guide

Table of Contents