Instrument Panel; Push Button Ignition Switch - Ford FOCUS 2016 Quick Reference Manual

Hide thumbs Also See for FOCUS 2016:
Table of Contents

Advertisement

INSTRUMENT PANEL

4
3
1
2
8
C. Press and release the SET + control,
*
Luggage Compartment
/
1
then take your foot off the accelerator.
*
Liftgate
Release
After you set your speed, you can press
*
Cruise Control
2
SET + or SET – to adjust your cruise
speed. To disable, tap the brake or
To Set Your Cruise Control Speed
press the CAN (Cancel) control.
A. Press and release the ON control.
B. Drive to the desired speed.
5
9
6
7
*if equipped
3
Service Engine Soon Light
Lights briefly when you switch the ignition on. If it
remains on or blinks after you start the engine, the On-Board
Diagnostics (OBD-II) system detects a problem. Drive in a
moderate fashion and contact your authorized dealer as
soon as possible.
Information Displays
4
Provides information about various systems on your vehicle.
Use the left, 5-way controls, located on the steering wheel,
to choose and confirm settings and messages. Refer to the
Information Displays chapter of your Owner's Manual for
more information.
5
Wiper Controls
*
6
Steering Wheel Controls
10
Use the right-hand, 5-way controls to adjust the
following features:
Press VOL + or – to increase or decrease volume levels.
Press
to access the previous or next radio station, CD
or MP3 track or preset satellite radio channel.*
Press
to access voice recognition.
Press
to answer a call.
Press
to exit phone mode or end a call.

Push Button Ignition Switch

7
Allows you to start your vehicle by pressing the START STOP
button while fully pressing down on the brake (automatic
transmission) or clutch (manual transmission) pedal. Press
the button again to switch the engine off.
Note: Your intelligent access transmitter must be inside the
vehicle for keyless starting to work.
Tilt/Telescope Steering Column
8
Unlock the steering wheel by pulling the lever down. Adjust
the wheel to the desired position. Push the lever back up to
lock the steering wheel in place.
9
Hazard Warning Flashers
*
10
Auto-Start-Stop
The system reduces fuel consumption and CO2 emissions
by shutting down the engine when you idle your vehicle, for
example at traffic lights. When you switch the ignition on,
the system automatically turns on.
To switch the system off, press the
OFF illuminates. Press
again to switch the system back
on. The system only switches off for the current ignition
cycle. See the Unique Driving Characteristics chapter in
*
your Owner's Manual for complete details.
switch and the word
4 • 5
*if equipped

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents