Keyless Entry System - Subaru impreza 2004 Quick Reference Manual

3. Keyless Entry System

A: WIRING DIAGRAM
<Ref. to WI-188, WIRING DIAGRAM, Keyless Entry System.>
B: ELECTRICAL SPECIFICATION
10
Content
Key warning switch
Registration connector
Door switch
Power supply
Empty
Empty
Door lock switch (Unlock)
Empty
Door lock switch (Lock)
Room light/Ignition switch illumina-
tion
Turn signal light (Left)
Turn signal light (Right)
Ground
Power supply (Hazard light)
Power supply
Door, rear gate lock actuator (with-
out double lock) or double lock mod-
ule (with double lock)
Door, rear gate lock actuator (with-
out double lock) or double lock mod-
ule (with double lock)
Keyless Entry System
9 8 7 6
18 17 16
Terminal No.
1 (INPUT)
2 (INPUT)
3 (INPUT)
5
6
7
8 (INPUT)
9
10 (INPUT)
11 (OUTPUT)
12 (OUTPUT)
13 (OUTPUT)
14
15
16
17 (OUTPUT)
18 (OUTPUT)
5 4
15 14 13
Measuring condition
Battery voltage is present when inserting the key into ignition switch.
0 V is present when connecting the registration connector.
0 V is present when any door is open.
Battery voltage is constantly present.
0 V is present when the door lock switch is turned to unlock position.
0 V is present when the door lock switch is turned to lock position.
• 0 V is present when pressing the transmitter OPEN button.
• 0 V is present when any door is open.
Battery voltage is present when pressing the transmitter OPEN or LOCK
button.
Battery voltage is present when pressing the transmitter OPEN or LOCK
button.
0 V is constantly present.
Battery voltage is constantly present.
Battery voltage is constantly present.
Battery voltage is present when pressing the transmitter OPEN button.
Battery voltage is present when pressing the transmitter LOCK button.
SL-15
SECURITY AND LOCKS
3 2 1
12 11
—
—
—
SL-00036