Camshaft Runout - Suzuki Intruder VZR1800 Service Manual

• If the camshaft journal oil clearance measured exceeds the
limit, measure the inside diameter of the camshaft journal
holder and outside diameter of the camshaft journal.
• Replace the camshaft or the cylinder head depending upon
which one exceeds the specification.
$ Camshaft journal holder I.D.:
Standard: (IN. & EX.):
24.012 – 24.025 mm (0.9454 – 0.9459 in)
% 09900-20602: Dial gauge (1/1 000, 1 mm)
09900-22403: Small bore gauge (18 – 35 mm)
$ Camshaft journal O.D.:
Standard (IN. & EX.):
23.959 – 23.980 mm (0.9433 – 0.9441 in)
% 09900-20205: Micrometer (0 – 25 mm)

CAMSHAFT RUNOUT

• Measure the runout using the dial gauge.
• Replace the camshaft if the runout exceeds the limit.
$ Camshaft runout:
Service Limit (IN. & EX.): 0.10 mm (0.004 in)
% 09900-20607: Dial gauge (1/100 mm, 10 mm)
09900-20701: Magnetic stand
09900-21304: V-block set (100 mm)
CAM SPROCKET AND AUTOMATIC-DECOMP.
• Inspect the cam sprocket teeth for wear and damage.
• Inspect the automatic-decomp. for damage and smooth oper-
ation.
• If there are unusual, replace the camshaft assembly and cam
chain as a set.
"
Do not attempt to disassemble the cam sprockets and
automatic-decomp. assembly. They are unserviceable.
ENGINE 3-31