Sony PSP-1006 K Instruction Manual page 99

SSID
Encryption
Scan
When the settings have been completed, press the right button to go to the
next screen.
6
Select the address setting method.
This screen is used to select the settings listed below. Most home networks
will allow you to use the settings shown in the "Easy" setup (this is the
recommended setup).
Easy
Custom
When you have finished selecting your settings, press the right button to
go to the next screen.
Enter the SSID settings for your access point.
If a WEP key is set up for your access point, use the directional
buttons and select "WEP". Then enter the WEP key. When you
enter the WEP key, it appears on the screen as "********".
Searches for and then displays a list of access points (or wireless
networks) with their corresponding SSIDs and the WEP key
status.
The following information is automatically set.
- IP address settings: Automatic
- DNS settings: Automatic
- Proxy server: Do Not Use
You can manually enter detailed setting information, such as is
used with a static IP network. For details, refer to the
instructions supplied with the network device or the information
provided by your Internet service provider.
Network Settings
GB
99