Panasonic DMR-EX93CEG Service Manual page 23

Mode name
Release Items Item of Service Mode executing is cancelled.
Error Code Display Last Error Code of U/H/F held by Timer is dis-
played on FL.
*Details are described in "7.1.1. Self-Diagno-
sis Functions".
ROM Version Display 1. Region code (displayed for 5 sec.)
2. Main firm version (displayed for 5 sec.)
3. Timer firm version (displayed for 5 sec.)
4. Drive firm version (displayed for 5 sec.)
5. ROM correction version (displayed for 5
sec.)
6. Loader version (displayed for 5 sec.)
7. Deviceinfo version (displayed for 5 sec.)
8.ST Microprocessor version (left displayed.)
White Picture Output White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive
by "I/P switch: [1] [4]"
Magenta Picture Out- Magenta picture is output with Component
put Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive
by "I/P switch: [1] [4]"
Item
Description
FL display
If any error history does not exist,
[F00] is displayed.
1.
*: Region of DVD (Example: 1,2.....)
2.
3.
4.
5.
6.
7.
8.
* are version displays.
*Initial mode is "Interlace".
Switch Interlace/Progressive
*Initial mode is "Interlace".
Switch Interlace/Progressive
23
Key operation
(Remote controller key)
Press [0] [0] in service mode.
Press [0] [1] in service mode
Press [0] [2] in service mode
Press [1] [1] in service mode.
Press [1] [4] in White Picture Output
mode.
*I/P are switched alternately.
Press [1] [2] in service mode.
Press [1] [4] in Magenta Picture
Output mode.
*I/P are switched alternately.