Siemens hicom 150 H optiset E standard Operating Instructions Manual page 22

0DNLQJ#DQG#$QVZHULQJ#&DOOV
6WHS#E\#6WHS
Program/Service
* 89=Door opener on?
3=change password?
1=enable with ring?
2=enable w/o ring?
Program/Service
#89=Door opener off?
55
Opening the door with a code (at the door):
After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.
Activating the door opener:
Press the key. The LED lights up
Select and confirm.
or
Enter the code.
Dial the entrance telephone number.
Enter the five-digit code. Default code = "00000".
or
Select the displayed function and press the "OK" dialog
key to change the code.
Select and confirm.
or
You can also open the door without a doorbell ring.
Deactivating the door opener:
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
$FFHSWLQJ#D#&DOO#)URP#DQ#$QVZHULQJ#
0DFKLQH
You can accept a call from any answering machine if the
machine is connected to your system (contact System
Support) and you have programmed the answering ma-
chine number on a key (Æ page 50).
The LED lights up. Press the key.