Removing The Meat Drawer And Cover; Adjusting The Meat Drawer Temperature; Removing The Freezer Bin/Basket - Roper RS20AWXEW00 Use And Care Manual

Removing the meat drawer and cover
To
remove the meat drawer:
1.
Slide the meat drawer straight out to
the stop.
Pull out to the stop, lift
the front, and pull again.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
I. Remove the crisper, the crisper cover,
and the meat drawer.
2. Tilt front of cover up.
3. Lift cover at back and pull straight out.
4. Replace in reverse order.
Adjusting the meat drawer temperature
Cold air flows from the freezer into the meat
drawer. This helps keep the meat drawer
colder than the rest of the refrigerator for
better storage of meats.
Slide the control from side to side to let
more or less cold air through.
Removing the freezer bin/basket
(on some models)
To remove the bin/basket:
1. Slide out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the bin/basket:
1. Place on the slides.
2. Make sure the wire stops clear the front
of the slides.
3. Slide in all the way.
Pull out to the stop, lift the
front, and pull again.
12
WITH OUESTIONS OR COMMENTS