After Working Inside Your System; Recommended Tools; System Cover; Removing The System Cover - Dell PowerEdge C6320 Owner's Manual

3. If applicable, remove the system from the rack.
For more information, see the Dell PowerEdge C6320 Getting Started Guide at Dell.com/
poweredgemanuals.
4. Remove the system cover.
Related Links
Safety instructions

Removing the system cover

After working inside your system

Prerequisites
Follow the safety guidelines listed in the Safety instructions section.
Steps
1. Install the system cover.
2. If applicable, install the system into the rack.
For more information, see the Dell PowerEdge C6320 Getting Started Guide at Dell.com/
poweredgemanuals.
3. Reconnect the peripherals and connect the system to the electrical outlet.
4. Turn on the system, including any attached peripherals.
Related Links
Installing the system cover

Recommended tools

You need the following tools to perform the removal and installation procedures:
• Phillips #1 screwdriver
• Phillips #2 screwdriver
• Torx #T20 screwdriver
• Clamper
• Wrist grounding strap

System cover

The system cover protects the components inside the system and helps in maintaining air flow inside the
system. Removing the system cover actuates the intrusion switch which aids in maintaining system
security.
Removing the system cover
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
64