Safety Precautions; For Your Safety; Protecting Your Telephone; Choosing The Installation Location - Siemens optiPoint 150 S User Manual

Hide thumbs Also See for optiPoint 150 S:
Table of Contents

Advertisement

Safety Precautions

Safety Precautions

For Your Safety

The optiPoint 150 S IP phone conforms to the European standard EN 60
950 which governs the safety of information technology equipment includ-
ing electronic office equipment. This device has been designed with safe-
ty in mind, thus protecting both individuals and objects.
There is always the danger of small objects being swallowed by young chil-
dren. In the case of optiPoint 150 S, this applies in particular to the con-
necting cord clip.
Please make sure that such items are not accessible to children.

Protecting Your Telephone

Choosing the Installation Location

2
Use only the enclosed power supply together with the special LAN ca-
ble.
Never open the power supply enclosure.
The telephone must not be used in bathrooms, etc. as it is not splash-
proof.
Before connecting or disconnecting the LAN cable, disconnect the
power plug from the wall outlet first.
Never allow the device to come into contact with staining or aggressive
liquids, such as, coffee, tea, juice, or soft drinks.
The telephone should be operated in a controlled environment with an
ambient temperature between 5°C and 40°C (41°F and 104°F).
To ensure good handsfree talking quality, the area in front of the micro-
phone (front right) should be kept clear. The optimum handsfree dis-
tance is 20 inches (50 cm).
Do not install the telephone in a room where large quantities of dust
accumulate; this can considerably reduce the service life of the tele-
phone.
Do not expose the telephone to direct sunlight or any other source of
heat, as this is liable to damage the electronic equipment and the plas-
tic casing.
Do not operate the telephone in damp environments such as bath-
rooms.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents