Safety Advice; Installation And Dismantling - Theben RAMSES 856 Installation And Operating Manual

Safety advice

WARNING
Danger of death through electric shock or
fire!
 Installation should only be carried out by a
qualified electrician!
 Use correct type of fuse for external fuse!
Overload leads to destruction of the relay.
 Avoid excessive heat generation.
Installation
 Remove baffle.
 Unlock and remove upper part of OT box RAMSES top2 OT by
turning the bayonet socket 90° anti-clockwise.
 Attach base of the OT Box RAMSES top2 to the wall
with enclosed material.
 Click terminal into the terminal support and connect cable
with the OT connection terminals.
 Power supply line of the OT bus, attach the outputs and
sensors in accordance with the selected connection diagram
to the connection terminals of the base (see connection
diagram on page 9).
 Put on upper part of the OT-Box RAMSES top2 OT, click in
and secure with bayonet socket.
 Afterwards optionally click in baffle or RAMSES 850 top2 OT
in opening.
 Connect OT-Box RAMSES top2 to power supply.
Dismantling
 Remove RAMSES 850 top2 OT or screen.
 Use a screwdriver to unlock upper part, remove and
open device. If necessary take base from wall.
3
GB
OT terminal
Bayonet socket