Peavey ENVOY Envoy 110 Operating Manual page 8

Front Panel
1 2 3
1 2 3
HIGH GAIN INPUT
1
Used for most electric guitars. The High Gain Input is 6 dB louder than the Low Gain Input (2).
LOW GAIN INPUT
2
Provided for instruments with extremely high outputs, which can result in overdriving (distorting) the
High Gain Input (1). If both inputs are used simultaneously, their levels are both Low Gain.
VOLUME
3
This control sets the volume level for the Clean channel.
VINTAGE/CLASSIC/WARM SWITCH
4
The CLASSIC position maintains a standard voicing. The VINTAGE position changes the overall function
of the EQ and adds a hint of brightness to emulate classic amp designs. The WARM setting also recon-
figures the EQ and is provided for darker sounds. Experiment with this switch, along with Clean EQ (5)
adjustments, to capture your desired tone. Refer to page 12 for suggested settings.
CLEAN EQ
5
These passive tone controls regulate the low, mid, and high frequencies of the Clean channel.
CHANNEL SELECT SWITCH
6
The Channel Select Switch determines which channel, LEAD or CLEAN, is active. This switch must be in
the "LEAD" position in order for the footswitch to function.
PRE GAIN
7
The Pre Gain controls the input volume level of the Lead channel.
4 5
6
4 5 7
6
7
8