4. Unscrew the cap screws using a driver(–) or an appropriate tool, remove two
screws on the cooling system cover, then disengage five mounting hooks.
5. Disassemble the wire housing on the upper right corner of the cooling system
c o v e r .
6. Remove two screws on the cover.
(Caution : Keep screws or foreign substances entering from the cold air
passage because it could cause malfunctioning of the
temperature control.)
7. Holding the cooling system upper cover, remove the cover by pulling it down
and then lifting it up.
8. Specifications for
cooling system assembly
2 8
FOAM-PE
(Improve cooling
system efficiency)
Cold air passage in the fresh
food compartment
45˚(Reduce noise caused by the flow of refrigerant)
Weld zone
Bimetal
thermo.
Temperature fuse
Defrost heater
1
2
Samsung Electronics