Table of Contents
Advertisement
Used to enter and exit the Station /
User Programming mode.
PROGRAM
PF (Programmable Feature): Located
on the upper part of the CO button
(PF)
array or on the DSS Console. Assigns
the desired button and used to access
the stored function. Mostly used as a
One-Touch dialling button. (Only the "F
and number" may be shown on some
telephones.)
Used to redial.
REDIAL
Used to disconnect the line.
RELEASE
SAVE: Used to store a dialled phone
number and redial.
(SAVE)
SDN (Secondary Directory Number): A
copy of the other extension's PDN
(SDN)
button. Acts as a proxy of the owner
PDN button.
Used to alternate between the
subfunctions on the display.
SHIFT
Using a Jog Dial
The Jog Dial can be used for the display contrast and the volume control or you can search for
desired items on the display. Rotate the Jog Dial in the either direction as desired. The contrast or
the volume level and the items will change as follows:
Left
(anticlockwise)
Level decreases
To the previous item
User Manual
Soft: Used to perform a function or
operation appearing on the bottom line
of the display.
Speakerphone: Used for the hands-
free operation.
SP-PHONE
Used to transfer a call to another party.
TRANSFER
Used to monitor an intercom call
VOICE CALL
automatically, but it cannot be used for
hands-free conversations. It also
MUTE
mutes the handset microphone during
a conversation. (KX-T7450, KX-T7560
only)
Used to adjust the volume of the
telephone speaker, handset receiver,
VOLUME
headset or ringer. This button can also
be used to adjust the display contrast.
If the term is in parentheses like (Account) in this
section, it means a flexible button has been made
into an "Account" button.
Right
(clockwise)
Level increases
To the next item
Operation
21
Advertisement
Table of Contents
