Operation And Important Riding Points; Starting The Engine - Yamaha XC125RR Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS

Read the Owner's Manual carefully to
become familiar with all controls. If
1
there is a control or function you do not
understand, ask your Yamaha dealer.
2
WARNING
3
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
4
or injury.
5
6
7
8
9
EAU15952
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. To start the engine after a
EWA10272
turnover, be sure to turn the main
switch to "OFF" and then to "ON". Fail-
ing to do so will prevent the engine from
starting even though the engine will
crank when pushing the start switch.
EAU45311

Starting the engine

NOTICE
See page 5-3 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
1. Turn the key to "ON".
2. Close the throttle completely.
3. Start the engine by pushing the
NOTICE
For maximum engine life, never ac-
celerate hard when the engine is
cold!
5-1
The engine trouble warning light
and coolant temperature warning
light should come on for a few sec-
onds, then go off. NOTICE: If a
warning light does not go off,
have a Yamaha dealer check its
electrical circuit.
[ECAT1171]
start switch while applying the front
or rear brake.
If the engine does not start, re-
lease the start switch, wait a few
seconds, and then try again. Each
starting attempt should be as short
EAUT3681
ECA10251
ECA11042