Yamaha XC125RR Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
TIP
If the odometer, tripmeter, or oil change
tripmeter indicates "-----", have a Yama-
1
ha dealer check the multi-function dis-
play.
2
Odometer
3
TIP
For the U.K.: The odometer and tripme-
4
ter units can be switched from kilome-
ters to miles by pushing the "SELECT"
button for 1 second.
5
6
1
7
8
9
1. Odometer
Tripmeter
To reset the tripmeter, select it by push-
ing the "SELECT" button until "TRIP" is
displayed, and then push the "RESET"
button for 1 second.
1
1. Tripmeter
Oil change tripmeter
To reset the oil change tripmeter, select
it by pushing the "SELECT" button until
the oil change tripmeter is displayed,
and then push the "RESET" button for
3 seconds.
Push the "SELECT" button again to
start the oil change tripmeter; the dis-
play changes to the ODO mode.
3-5
1
1. Oil change tripmeter
Oil change indicator "OIL
CHANGE"
This indicator flashes at the initial 1000
km (600 mi), then at every 3000 km
(1800 mi) thereafter to indicate that the
engine oil should be changed.
After changing the engine oil, reset the
oil change tripmeter.
If the engine oil is changed before the
oil change indicator flashes (i.e. before
the periodic oil change interval has
been reached), the oil change tripmeter
must be reset after the oil change for
the next periodic oil change to be indi-
cated at the correct time.