Using Cordless Handsets; Introduction; Handset Features - Cisco SPA302D Owner's Manual

4

USING CORDLESS HANDSETS

Introduction

The Hosted PBX phone system supports up to 3 Cordless
Handsets per Cordless Base. The Cordless Base is used to
connect the Cordless Handsets to the Intermedia Network. The
Cordless Base can be plugged into any one of the 4 phone jacks
on the back of the optional Base Unit or into your router or
switch. Each Cordless Handset can take up to 2 calls but you
may only have 3 simultaneous calls going with your 3 Cordless
Handsets (for example, 3 Cordless Handsets may each have
one phone call, or one Cordless Handset can be on a call with
one call on hold, and one other Cordless Handset can be on a
call).

Handset features

• 2.0-in. TFT (176 x 220 pixels),
65,000 colors, backlit wit scratch-
resistant lens
• White illuminated keypad back-
light
• Status icons (do not disturb
[DND], call forward, mute,
offhook, speakerphone, signal
status, and battery strength)
• Date and time display
• Handset name display
• Dial key lock
• Speed dial: Eight programmable
• Private phone book (50 records)
• Shared phone book (50 records)
• Call history (50 records filtered by
Outgoing, Incoming, and Missed)
• One-touch dial from call history
• Missed call(s)
• Message-Waiting Indicator (MWI)
tones
• Visual MWI (VMWI)
• Five ringtones
• Distinctive ring support
• Hearing Aid Compatibility (HAC)
20
Owner's Manual