14
<Remove the paper>
Put down
connector
1)Attach the side key at shieldcan.
2)Get rid of 3 papers at the MAIN LCD back side.
3)Insert the MAIN LCD connector at shieldcan's hole.
4)put down the LCD connector.
5)Atfer pushing camera and SPK connectors again, putting down the MAIN LCD connector.
※ caution
1) Be care of scratch and molding damage.
15
Insert
battery
FPCB
1)Remove the paper of battery FPCB fixing tape.
2)Romeve the paper of battery fixing both faces tape.
3)Insert battery FPCB.
4)Insert battery.
5)Attach EMI tape A,B at the upper side of key connector.
6)Attach an insulated tape at the upper side of battery FPCB connector.
7)Put down main key connector following the fig.4.
※ caution
1) Be care of scratch and molding damage.
박리지 제
Remove the
paper
거
> Put down the main LCD connector
Insert
battery
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Insert LCD connector at
shieldcan'hole
<Insert connector>
TAPE A
TAPE C
2-13
Main Electrical Parts List
TAPE B
Attach EMI
tape
Attach tape
of preventing
to come off