Audio Sources - Skoda Infotainment Swing Owner's Manual

Hide thumbs Also See for Infotainment Swing:
Table of Contents

Advertisement

Note
With more than 1,000 tracks in the folder only the first 1,000 tracks with the
oldest creation date are displayed.
The scanning speed of the folder / track list depends on the connection
speed and volume of data.
Multimedia database
Fig. 10 Multimedia database
For some Apple devices connected via USB, the multimedia database is dis-
played instead of the folders and title lists.
In the multimedia database, the tracks are sorted according to individual cate-
gories
» Fig.
10.
B
To display the multimedia database, in the Media main menu tap on the
function  surface.
To playback, select the category and then the title.
Multimedia database
» Fig. 10
Selected audio source / Selected category / folder of the audio source
A
Tap - selection of the parent folder / Hold - selection of the audio source
Sorting categories
B
Media settings
Tap on the function surface in the Media main  surface.
Mix/repeat inc. subfolders - Switch on/off the title display including subfolders
Bluetooth - Settings for the Bluetooth
Traffic program (TP) - Switches traffic programme on/off
Activate AUX - Enables / disables the AUX input
®
function
Remove SD card safely - Safe removal of the inserted SD storage card
Remove USB safely - safe removal of external devices connected to the USB in-
put

Audio sources

Introduction to the subject
To play, first connect the desired audio source or insert it into the device and
then select the audio source from the list
matically (does not apply to AUX).
If AUX is selected as the audio source, the playback must be started on the
connected device.
CAUTION
Do not save any important data or that which has not been backed up on the
connected audio sources. ŠKODA assumes no responsibility for lost or dam-
aged files or connected audio sources.
When changing or connecting an audio source, this may cause sudden
changes in volume. Reduce the volume before changing or connecting an au-
dio source.
When connecting an external audio source, the external source information
messages can be displayed. These messages must be observed and if neces-
sary confirmed (e.g. enabling data transfer etc).
SD-card
Insert the SD card in the slot in the direction of arrow (with the cut end fac-
ing right), until this "locks"
» Fig.
To remove the SD card, tap on the Media main menu function surface  →
Remove SD card safely. Please wait... → SD can now be removed. appears on the screen.
» page
16. Playback starts auto-
Fig. 11
Insert the SD card
11.
Media
17

Advertisement

Table of Contents
loading

Table of Contents