Skoda Infotainment Swing Owner's Manual page 15

List of available stations
Fig. 6 Example of a list of available FM/DAB stations (hierarchical sorting)
›
To display the list of available stations of the currently selected broadcasting
area, rotate the controller in the Radio main  turn.
›
To play, tap on the function surface of the desired station.
›
To filter the stations according to programme type (e.g. culture, music, sport
etc.) in the FM and DAB station list, tap on the function surface 
1) 2)
.
Information symbols
Station is stored under one of the preset station buttons

Currently played stations

Traffic information station

 (e.g.) Type of programme being broadcast (FM and DAB)
 (e.g.) Type the regional broadcast (FM)
Signal reception is not available (DAB)

Signal reception is not safe (DAB)

Update the list of stations
In the FM area, the station list is updated automatically.
In the AM and DAB area, a manual update is carried out by tapping on the
function surface  » Fig. 6 -  Carry out.
1)
Applies with activated RDS function.
2)
Applies to selected global sorting of the station list.
Sort the stations in the station list
The FM station list can be sorted depending on the settings of the menu item
 → Advanced settings → Stations sorting .: are sorted.
The AM station list is sorted according to the frequency of the received sta-
tion.
The DAB station list can be sorted depending on the settings of the menu item
 Type of stat. list: are sorted.
Station buttons for your favourite stations
Each radio range includes 12 station buttons for saving preferred stations.
These are each divided into three groups.
A station can be stored in the device memory in one of the following ways.
›
To save a station on the main menu Radio, hold down the desired function
surface » Fig. 5
C
›
To save a station in the station list, keep the function surface of the desired
station held down, select the memory group, and then tap the desired sta-
» Fig. 6 -
tion button.
If a station is saved on an already assigned station button, this station button
will be overwritten.
Station logos
The station key of a preferred station can contain the name and the station
logo.
Assign a station logo
›
Tap on the Radio function surface  → Station logos.
›
Tap on an occupied station button and select the data carrier (SD card, USB).
›
Search for and select the desired station logo on the respective data carrier.
Remove station logo
›
Tap on the Radio function surface  → Station logos.
›
Tap on the station button from which you want to remove a logo.
›
or: Tap on the function  All to delete the logos of all the station buttons si-
multaneously.
›
Confirm / cancel the removal.
on page 12 until an acoustic signal sounds.

13
Radio