Accessories; Parts - Taser Axon Body 2 User Manual

System Status
Device not assigned, agency mismatch, camera set in
the offline mode, or device error
Uploading data
Firmware update, internal battery charging, extremely
low battery, or memory full
Transfer error, device re-trying to transfer
Network error (no connection)
Axon Dock 2 has no communication with the camera.
Contact TASER customer service.
Lens – The camera lens.
Pressing buttons causes the Axon Body 2 camera to emit audio alerts (beeps) to indicate system actions. See Chap-
ter 4: Notification Reference Tables or more information.

Accessories

The Axon Body 2 camera is designed to work with the new Axon RapidLock mounting system. The RapidLock
mounting system consists of the attachment piece (called the key) on the camera and the various mounting op-
tions including the attachment receiver (called the lock). To engage the Axon RapidLock, insert the key of the
camera into the lock of the mount and turn it 90 degrees counterclockwise (when you are looking straight at the
mount). To release the camera from the mount, turn the camera 90 degrees clockwise.
The various mounts that use this system can be used with a wide variety uniforms, and holds the camera to your
shirt, patrol vest, jacket, or belt.

Parts

back
Blinking red
Blinking yellow – DO NOT remove the camera from
the Axon Dock 2
Blinking red and yellow – DO NOT remove the camera
from the Axon Dock 2
Blinking green and yellow
Blinking red, yellow, and then green (cycling all colors)
LED off
lock
Chapter 2: Getting to Know Your Axon Body 2 Camera 4
TASER Axon Body 2 Camera User Manual
Upload Status LED
camera