Battery Status; Configuring Your Axon Camera; Adjusting The Audio Prompt Volume; Turning Off The Camera Leds (Stealth Mode) - Taser Axon Body 2 User Manual

Battery Status

Press the Battery button to determine the percentage remaining in the battery. See Chapter 2: Getting to Know
Your Axon Body 2 Camera for details on the Battery LED functions.

Configuring Your Axon Camera

Adjusting the Audio Prompt Volume

1
Connect the Axon Body 2 camera to the Evidence Sync application.
2
Select the device settings.
3 Select the desired volume settings for the audio beeps recorded by the device.
The volume has four settings. At each level, the camera beeps, providing you with a sample of the volume:
• Low
• Medium
• High
• Off

Turning off the Camera LEDs (Stealth Mode)

For some situations, you may wish to turn off the lights on your camera. You can turn off the lights through the
Evidence Sync software or by using the Battery button. To turn the lights off using the Battery button:
• Press and hold the Battery button for 10 seconds.
To turn the lights back on:
• Press and hold the Battery button for 10 seconds.
To use Evidence Sync:
1
Connect the Axon Body 2 camera to the Evidence Sync application.
2
Select the device settings.
3
Select the option to turn off the device LEDs.
• The Operation LED flashes red, yellow, and then green before shutting down the lights.
• Pressing the Battery button will momentarily light both the Operation LED and the Battery LED, dis-
playing the current operating mode and battery level. For interpreting the LED colors, see Chapter 2:
Getting to Know Your Axon Body 2 Camera.
To turn the lights back on:
1
Connect the Axon Body 2 camera to the Evidence Sync application.
2
Select the device settings.
3 Select the option to turn on the device LEDs.
TASER Axon Body 2 Camera User Manual
Chapter 3: Recording with the Axon Body 2 Camera 8