Advertisement
Tuning (
) button to tune downward. Pressing either button for
longer than 0.5 seconds will cause the radio to tune rapidly in the
selected direction until the next station is encountered.
bn bn bn bn bn
AUTOMATIC SEEK TUNING (SEEK)
During radio operation, this function is used to search for stations
automatically. By pressing the button, the radio will seek the next
station and stop at that frequency. The Seek function can be
stopped by pressing the button again or activating any other tuning
function.
bo bo bo bo bo
LOCAL/DISTANT SELECTOR (LOC)
This feature is used to select the strength of the signals at which
the radio will stop during Automatic Seek Tuning. Pressing the
button will select the Local setting ( LOC will appear on the display
panel) and only strong (local) stations will be received. Pressing
the button again will select the Distant setting ( LOC will disappear
from the display panel) and the radio will stop at a wider range of
signals, including weaker (more distant) stations.
bp bp bp bp bp
FM MONO/STEREO SELECTOR (M/S)
During FM radio operation, this button is used to select mono or
stereo reception of the broadcast signal. Under normal reception
conditions, the unit should be left in the stereo mode as indicated
by the ST on the display panel when tuned to an FM stereo signal.
If the stereo signal is too noisy for comfortable listening, press the
FM Mono/Stereo Selector button to switch to mono reception (the
ST indication will disappear from the display panel). To return to
stereo reception mode, press the button again so that the ST
indication appears on the display panel.
bq bq bq bq bq
PRE-SET SCAN (PS)
AUTO-STORE TUNING (AS)
Press this button momentarily to scan the stations pre-set into the
memories on the 3 FM bands or 2 AM bands. The unit will stop
at each pre-set station for 5 seconds before continuing to the next
pre-set station (the pre-set number on the display panel will flash
during Pre-Set Scan operation). Press the button again momentarily
to stop Pre-Set Scan operation and remain on the selected frequency.
Pressing and holding the button for longer than 2 seconds will
activate the Auto-Store Tuning feature which will automatically
scan and enter up to 6 stations into the 6 pre-set memories on the
band in use. After entering the stations into the memories, the unit
will automatically stop at each station for 5 seconds so each can
be heard. If you have already set the pre-set memories to your
favorite stations, activating the Auto-Store Tuning feature will
erase those stations and enter the new ones. This feature is most
useful when travelling in a new area where you are not familiar with
the local stations.
br br br br br
STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band, use the
following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual Up/Down
bm
, or Automatic Seek
3. Press the pre-set button to be set and continue to hold it in for
approximately 2 seconds. The pre-set number will appear on the
display panel indicating that the station is now set into that
pre-set memory position. The station can now be recalled at
any time by pressing that button.
-3-
bn
Tuning Controls.
Advertisement
