Clearing The Ram - Furuno FAX-410 Operator's Manual

2.5

Clearing the RAM

The RAM stores frequency data of fax transmitting stations throughout the world. If part of
the RAM was deleted in error, the data for fax transmitting stations can be retrieved from the
ROM. In this case it is necessary to first clear the RAM. Be sure that it is all right to clear the
RAM as all data stored there will be deleted.
1. Press the PRG key followed by the 9 key.
RAM CLEAR ! !
PUSH E KEY
2. Press the E key to clear the RAM.
3. Press the C key to go to the standby display.
Note: Do not confuse RAM error with keyboard lockup. The keyboard may lock if some
abnormal operation is detected. If this occurs, turn the power off and on again.
2. MAINTENANCE
21