Configuring The I/O Server - Siemens 3964R User Manual

Configuring the I/O Server

Once the server has been installed, a small amount of configuration is required.
Configuring the server automatically creates a configuration file named S3964R.CFG.
This file stores the configuration information for the adapter cards or communication
ports and all of the topic definitions (described in detail later).
The configuration file is automatically saved to the directory in which the server is
installed unless a different directory is specified.
To access the options used for the various configurations, open the Configure menu:
Note If any of the options appear grayed, then these options are not available with this
software version.
To perform the required configurations, start up the server
by double-clicking on its icon. If the server starts up as an
icon, double-click on the icon to open the server's window.
3