Audiovox CDC-MCR2 Owner's Manual page 4

in a random, shuffled order. The Track Select
select tracks in the shuffled order instead of the normal progres-
sion. The Track Shuffle mode can be cancelled by pressing the
7
Shuffle button again, or by activating the Scan
functions.
When the Shuffle button is pressed and held longer than 2
seconds, the "SFL" and "DISC" indications will appear on the LCD
panel and the discs in the magazine will be played in a random
shuffled order, as well as the tracks on each disc. When all the
tracks on the selected disc have been played, the next disc will be
selected in shuffled order and its tracks will be played in shuffled
order. The Disc Shuffle mode can be cancelled by pressing the
Shuffle button again, or by activation the Scan
functions.
8
TRACK / DISC REPEAT (RPT)
When the Repeat button is pressed, the indication "RPT" will
appear on the LCD panel and play of the selected track will be
continuously repeated until the Track Repeat mode is cancelled by
pressing the Repeat button again or by activating the Scan
7
Shuffle functions.
When the Repeat button is pressed and held longer than 2
seconds, the "RPT" and "DISC" indications will appear on the LCD
panel and play of the selected disc will be continuously repeated
until the Disc Repeat mode is cancelled by pressing the Repeat
button again or by activating the Scan
9
TRACK / DISC SCAN (SCN)
When the Scan button is pressed, the indication "SCN" will appear
on the LCD panel and the first 10 seconds of each track on the disc
will be played in order. When a desired track is reached, press the
Scan button again and play of that track will continue ("SCN" will
5
function will also disappear from the display). Track Scan mode will be cancelled by
activating any other function (Repeat, Shuffle, Disc Select, Track
Select, or Track Search).
9 8
or Repeat
When the Scan button is pressed and held for longer than 2
seconds, the "SCN" and "DISC" indications will appear on the LCD
panel and the first 10 seconds of the first track of each disc in the
magazine will be played. When the desired disc is reached, press
the Scan button again and play of that disc will continue ("SCN" and
"DISC" will disappear from the display). Disc Scan mode will also
be cancelled by activating any other function (Repeat, Shuffle, Disc
Select, Track Select, or Track Search).
bl
9 8
or Repeat
The sensor for the infrared signal from the optional wireless remote
control is located behind this lens. For optimal operation of the
remote control, keep the lens clean and do not allow objects to
block it.
bm
9
A reset button is located on the front panel of the wired commander
or
which must be activated with a pen or other thin object as it is
recessed to prevent accidental engagement. The reset circuitry is
provided to protect the unit's microprocessor and laser pick-up
system and should only be activated under the following circum-
stances:
1. Initial installation after all wiring is completed.
9 7
or Shuffle functions.
2. If abnormal disc operation is encountered, the reset button may
CAUTION: Avoid use of Reset buttons after initial use unless you
3
REMOTE SENSOR
RESETBUTTON
be pressed to clear the system and return to normal operation.
have a definite abnormal disc operation. Use the
EJECT button on the changer to remove the CD
magazine for normal operation.