Access The Web Configuration Menu; Important Settings; Nat Settings - Grandstream Networks GXW42XX series User Manual

ACCESS THE WEB CONFIGURATION MENU

The GXW42XX HTML configuration menu can be accessed via Ethernet port:
To access the HTML configuration menu from the Ethernet port:
1. Follow table 4 to find the Ethernet port IP address.
2. Open a web browser, type in the IP address – for example:
GXW42XX IP-Address is the Ethernet IP address for the GXW42XX).
NOTE:

The IVR announces 12 digits IP address, you need to strip out the leading "0" in the IP address. For ex.
IP address: 192.168.001.014, you need to type in
Once the HTTP request is entered and sent from a web browser, the user will see a log-in screen. There are
two default passwords for the login page:
The password is case sensitive with maximum length of 25 characters. The factory default password for End
User and administrator is "123" and "admin" respectively. Only an administrator can access the "ADVANCED
SETTING", "Profile 1~4", and "FXS PORTs" configuration pages. Please reference the GUI pages using the
following link:
http://grandstream.com/products/gxw_series/gxw42xx/GUI.zip

IMPORTANT SETTINGS

The end-user must configure the following settings according to the local environment.
NOTE: Most settings on the web configuration pages are set to the default values.

NAT SETTINGS

If you plan to keep the gateway within a private network behind a firewall, we recommend using STUN
Server. The following three (3) settings are useful in the STUN Server scenario:
FIRMWARE 1.0.4.4
Downloaded from www.Manualslib.com
User Level: Password:
End User Level 123
Administrator Level admin
GXW42XX USER MANUAL
manuals search engine
http://GXW42XX -IP-Address
http://192.168.1.14 in the web browser.
Web pages allowed:
Only Status and Basic Settings
Browse all pages
(the
PAGE 31 OF 57