Configuration Guide; Configuring Gxw400 Xvia Voice Prompt; Configuring Gxw400 X With; With Web Browser - Grandstream Networks GXW–400x User Manual
Analog ip gateway 4 or 8 fxs ports
Hide thumbs
Also See for GXW–400x:
- User manual (78 pages) ,
- Configuration manual (26 pages) ,
- Quick installation manual (7 pages)
Table of Contents
Advertisement
C
ONFIGURATION
C
GXW400
ONFIGURING
DHCP M
ODE
Select voice menu option 01 to enable GXW400x to use DHCP.
STATIC IP M
ODE
Select voice menu option 01 to enable GXW400x to use STATIC IP mode, then use option 02, 03, 04, 05
to set up IP address, Subnet Mask, Gateway and DNS server respectively.
F
S
IP A
IRMWARE
ERVER
Select voice menu option 13 to configure the IP address of the firmware server.
C
S
ONFIGURATION
ERVER
Select voice menu option 14 to configure the IP address of the configuration server.
U
P
PGRADE
ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
F
U
M
IRMWARE
PGRADE
Select voice menu option 17 to choose firmware upgrade mode among the following three options: 1)
always check, 2) check when pre/suffix changes, and 3) never upgrade
WAN P
W
A
ORT
EB
CCESS
Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.
C
GXW400
ONFIGURING
GXW400x has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow users to configure the GXW400x through a Web browser such as
Microsoft's IE and AOL's Netscape.
A
W
C
CCESS THE
EB
ONFIGURATION
The GXW400x HTML configuration menu can be accessed via LAN or WAN port:
From the LAN port:
1. Directly connect a computer to the LAN port.
2. Open a command window on the computer
3. Type in "ipconfig /release", the IP address etc. becomes 0.
4. Type in "ipconfig /renew", the computer gets an IP address in 192.168.2.x segment by default
5. Open a web browser, type in the default gateway IP address. http://192.168.2.1. You will see the
login page of the device.
From the WAN port:
The WAN port HTML configuration option is disabled by default from factory. To access the HTML
configuration menu from the WAN port:
1. Enable the "WAN Port Web Access" option via IVR option 12.
Grandstream Networks, Inc.
G
UIDE
VIA V
P
X
OICE
ROMPT
DDRESS
IP A
DDRESS
ODE
W
B
X WITH
EB
ROWSER
M
ENU
GXW-400x User Manual
Firmware 1.0.0.39
Page 18 of 39
Last Updated: 5/2007
Advertisement
Table of Contents
