Oil Capacity - Kia Picanto 2006 Owner's Manual

Maintenance
7. Install the oil filter and tighten it.
(Refer to the oil filter caution label
for tightening instructions.)
1
8. Install a new washer on the drain
plug. Don't use an old washer
repeatedly.
2
9. Replace the drain plug after the oil
has thoroughly drained. Torque the
3
plug to 3.5~4.5 kg•m (25.3~32.5
lb•ft, 34.3~44.1 N•m).
10. Refill the engine with new oil to
4
the F mark on the dipstick. Do not
overfill.
5
11. Reinstall the oil filler cap secure-
ly.
12. Start the engine and inspect
6
around the oil filter seal for leaks.
Stop the engine.
7
13. Check the oil level and fill to the F
mark as necessary.
8
9
7 16

Oil capacity

With filter change :
3.0 liters (3.2 US qt.)
Without filter change :
2.8 liters (3.0 US qt.)
Use only the specified Service
Grade engine oil. (Refer
"Recommended Lubricants" later in
this section.)
✽ ✽ NOTICE
• Although oil filters may have the
same external appearance, their
internal designs differ significant-
ly. These filters are not inter-
changeable. To avoid potential
engine damage, use only the speci-
fied filter. Consult an Authorized
to
Kia Dealer.
• Follow these instructions careful-
ly. An improper oil filter installa-
tion can cause oil leakage and
engine damage. Drained engine oil
should be disposed of properly,
according to local environmental
protection agency codes. It should
not be thrown down the drain or
in the trash.