Replacing The Oven Light; Removable Oven Racks - Roper B8758B0 Use And Care Manual

Self-cleaning built-in gas oven
Table of Contents

Advertisement

REPLACING
THE OVEN LIGHT
Do not touch oven bulb when hot, with wet hands, or wrpe oven light area
wrth wet cloth.
Never touch the electrically
live metal collar on the bulb when replac-
ing it.
Electrical
power must be shut off if you have to replace a broken bulb.
SELF-CLEANING
OVENS ONLY:
1. Remove the three screws and lift OH the glass retainer, glass cover
and gasket.
2.
Replace the bulb with a 40 watt appliance
bulb.
3.
Replace the gasket, glass cover and glass retainer. Tighten screws
securely.
-
GASKET
GLASS
COVER
u
SELF-CLEANING
OVENS
REMOVABLE
OVEN RACKS
Be careful not to scratch the oven finish when installing or removing the
oven rack.
To install:
1. Set the raised back edge of the rack on a pair of rack guides.
2.
Push the rack in until you reach the bump in the rack guide, then lift
the front of the rack a bit and push the rack all the way in.
To remove:
1.
Pull the oven rack out then up.
See the cleaning information
on page 13
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B8758b1

Table of Contents