Neutralising Granulate; Miscellaneous; Tundish Kit; Tool Kit - Viessmann VITODENS 111-W Technical Manual

Installation accessories Vitodens 111-W

Neutralising granulate

Part no. 9524 670
2 x 1.3 kg

5.4 Miscellaneous

Tundish kit

Part no. 7459 591
Tundish with trap and rose. For connecting the drain lines of the
safety valves and the condensate drain.
Drain connection G 1

Tool kit

Part no. 9537 070
For maintenance and service

Ionisation current test adaptor

Part no. 7822 883
For measuring the ionisation current with commercially available
tester

5.5 Sensors

CO limiter

Part no. 7499 330
Monitoring device, for safety shut down of the boiler in the event of
escaping carbon monoxide.
Wall mounting in the ceiling area near the boiler.
Can be used for boilers built from 2004 onwards.
Components:
■ Casing with integrated CO sensor, relay and displays for operation
and alarm
■ Fixing materials
■ Power cable (2.0 m long)
■ Connecting cable – relay for burner shutdown (2.0 m long)
7 0

Design information

6.1 Positioning, installation

Siting conditions for open flue operation (appliance type B)

Type B and B
23 33
In rooms where air contamination from halogenated hydrocar-
bons may occur, such as hairdressing salons, printing shops, chemi-
cal cleaners, laboratories, etc., operate the Vitodens only as a room
sealed system.
VITODENS
(cont.)
Case with all tools required for maintenance and service:
Screwdriver, extension and inserts
Specification
Rated voltage
Rated frequency
Power consumption
Rated breaking capacity
of the relay output
Alarm threshold
Safety category
IP rating
Permissible ambient tem-
perature
If in doubt, please contact us.
Never install the Vitodens in areas subject to very dusty conditions.
The installation location must be kept free from frost and must be
adequately ventilated.
230 V~
50 Hz
3.5 W
8 A 230 V~
40 ppm CO
II
IP 20 to EN 60529; ensure through de-
sign/installation.
70 °C
VIESMANN
6
37