Saving Energy And Detergent; Programme Default Settings; Temperature; Spin Speed - Bosch WAT SERIES Instruction Manual And Installation Instructions

Saving energy and detergent

For light and normal soiling, you can
save energy (lower washing
temperature) and detergent.
Saving Soiling/note
Reduced temper- Light
ature and deter- No visible dirt or stains. Cloth-
gent quantity as ing has taken on some body
per the recom- odour, e.g.:
mended dosage
■
■
■
Normal
Visible dirt or a few light
stains, e.g.:
■
■
Temperature as Heavy
per the care label
Dirt and/or stains clearly visi-
and detergent
ble, e.g. tea towels, baby
quantity as per
items, work clothing
the recom-
mended dosage
for heavy soiling
When measuring the amount of
Note:
all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information. ~ Page 16
Light summer/sports
clothing (worn for a few
hours)
T-shirts, shirts, blouses
(worn for up to one day)
Guest bed linen and hand
towels (used for one day)
T-shirts, shirts, blouses
(sweat soaked, worn a
few times)
Towels, bedding (used for
up to one week)

Programme default settings

0
Programme default
settings
The default program settings are
P r o g r a m m e d e f a u l t s e t t i n g s
displayed in the display panel after
selecting the program.
You can change the default settings.
To do this, repeatedly press the
corresponding button until the required
setting is displayed on the display
panel.
Pressing and holding the buttons
Note:
automatically runs through the setting
values until the last one. Then press the
button again and you will be able to
change the setting values again.
You can find an overview of all possible
program settings on the supplementary
sheet for the installation and operating
instructions.

Temperature

(°C, Temp. °C, Θερμοκρ. °C)
Button depending on the model
Depending on what stage the program
is in, you can change the set
temperature before and during the
program.
The maximum temperature that can be
set depends on the program that has
been selected.

Spin speed

(0, 0 rpm, Στροφές 0)
Depending on what stage the program
is in, you can change the spin speed (in
rpm; revolutions per minute) before and
during the program.
Setting 0: The rinsing water is drained
but there is no final spin. The laundry
stays wet inside the drum, e.g. for items
that should not be spun.
en
13