Removing The System Board - Acer Aspire 4810 Series Disassembly Instruction

16. Carefully remove the LCD module from the base unit.
NOTE: When connecting the cables back to the unit, please note that the cables should be routed well.

Removing the System Board

1. See "Removing the Battery Pack" on page 5.
2. See "Removing the Lower Cover" on page 6.
3. See "Removing the Lower Cover" on page 6.
4. See "Removing the Optical Drive Module" on page 7.
5. See "Removing the DIMM" on page 7.
6. See "Removing the Hard Disk Drive Module" on page 8.
7. See "Removing the SSD Module" on page 9.
8. See "Removing the RTC Battery" on page 9.
9. See "Removing the Keyboard" on page 12.
10. See "Removing the WLAN Board Module" on page 13.
11. See "Separating the Upper Case from the Lower Case" on page 14.
12. See "Removing the LCD Module" on page 20.
13. Disconnect the card reader board cable from the system board.
22