Audiovox VOH1041DL Owner's Manual page 7

REMOTE CONTROL OPERATION
Monitor Controls :
1. POWER
Press this button to turn on the set.
button again to turn the VOH1041DL off.
2. PICTURE UP/DOWN BUTTONS
Use these buttons to make adjustment in the
picture select mode and AV source select.
3. VOLUME UP/DOWN BUTTONS
Use these buttons to raise or lower the volume
level of the External Speakers or headphone jacks
if installed.
4. MENU Button
Press the MENU button.
appears. Use the MENU button to highlight the
desired function.
5. MUTE Button
Press this button to turn the TV sound off. Press
the button again to restore the sound to the
previously set level. MUTE may also be released
by pressing the VOLUME +/–.
6. SOURCE Button
Press this button to select AV1 or AV2.
VCP Controls
7. VCP POWER BUTTON
This button is
AUDIOVOX VCP ON and OFF.
Press the
The MENU displa y
used to turn an
8. "REW" REWIND BUTTON*
If this button is pushed while the tape is
stopped, the tape will rewind. If this button is
pushed while the tape is playing, the VCP will
go into rewind search mode.
9. PLAY BUTTON*
Press this button to activate play mode while a
Video Tape is loaded into the VCP. This button
may also be used to disengage search and
pause modes. For more information, consul t
the VCP owner's manual.
10 "FFWD" FAST FORWARD BUTTON*
If this button is pushed while the tape is
stopped, the tape will fast forward. If this
button is pressed while the Video Tape is
playing, the VCP will go into fast forward
search mode.
11. STOP BUTTON*
Press this button to stop the Video Tape.
12. REPLAY BUTTON*
Pressing this button will rewind the Video Tape
and immediately begin playback when the
Video Tape is fully rewound.
*Consult the VCP owner's manual for more
information.
optional
-6-