Table of Contents
Advertisement
Starting
your washer
Before starting
your washer:
I. Measure
and add detergent.
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD
SIZE
Select WATER
2. TEMPERATURES
l
Turn the knob to point at a setting
l
Match the wash water temperature
that describes
the size of load you
to the type of fabrics
and soils being
want to wash.
washed.
Recommended
wash temperatures
can be found in your "Laundry
Guide:'
. Set the knob anywhere
on or be-
tween
EX SMALL (a few items) and
LARGE (a full load).
NOTE: Use the LARGE wafer
level
for besf permanent
press resulk
,._~
.
LOAD
SIZES AND WATER LEVELS
For best cleaning
results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing
of load items.
CAUTION:
DO NOT
OVERLOAD WASHER.
*Approximate
fill with load.
LARGE (17.3 gals./655
L)*
MED (13.4 gals./50.8
L)'
EX SMALL (9.5 galsJ36.0
L)'
4
Advertisement
Table of Contents
