HP ProDesk 600 G1 Desktop Mini Illustrated Parts & Service Map page 3

System setup and boot
Access the Setup Utility during computer boot by pressing the F10 key. If you do not press F10
at the appropriate time, you must restart the computer and again press F10 when the monitor
light turns green. NOTE: Not all settings are available for all models.
Computer Setup Menu
Heading Option/Description
File System Information - Lists the following main system specifications:
• Product name
• Manufacturer
• SKU number
• Processor type/speed/stepping
• Installed memory size/speed/ch
• Integrated MAC Address
About - Displays copyright notice.
Set Time and Date - Allows you to set system time and date.
Flash System ROM - Allows you to update the system ROM with a BIOS image
file located on removable media.
Replicated Setup - Allows you to save or restore system configuration to/
from a USB flash drive.
Default Setup - Allows you to save current settings as default or restore fac-
tory settings as default.
Apply Defaults and Exit - Applies the selected default settings and clears any
established passwords.
Ignore Changes and Exit - Exits Computer setup without saving changes.
Save Changes and Exit - Saves changes to system configuration or default
settings and exits Computer Setup.
Storage Device Configuration - Lists all installed BIOS-controlled storage devices. The
following options are available:
• CD-ROM
• Hard Disk
• Diskette (external USB)
Storage Options - Allows you to set:
• SATA Emulation - Choose how the SATA controller and devices are accessed
by the OS. SATA Emulation choices are AHCI or IDE.
• Removable Media Boot - Enables/disables ability to boot the system from
removable media.
Boot Order - Specify boot order for UEFI and legacy boot sources. Also specify
hard drive boot order.
• Shortcut to Temporarily Override Boot Order
Security Setup Password - Set and enable the setup (Admin) password.
Power-On Password - Set and enable power-on password.
Password Options - Allows to you enable/disable:
• Lock Legacy Resources
• Setup Browse Mode
• Password prompt on F9 & F12
• Network Server Mode
• Stringent Password
Device Security - Set Device Available/Device Hidden for: system audio, network con-
troller, and SATA ports.
USB Security - Set Device Available/Device Hidden for front USB ports, rear USB
ports, accessory USB ports.
Slot Security - Disable any PCIe slots.
Network Boot - Enables/disables boot from OS (NIC models only).
System IDs - Allows you to update asset tag, ownership tag, UUID, keyboard
locale setting.
Master Boot Record Security - enables/disables MBR.
System Security - Allows you to set:
• Data Execution Prevention (enable/disable)
• Virtualization Technology (VTx) (enable/disable)
• Embedded Security Device (enable/disable)
• OS management of Embedded Security Device
DriveLock Security - Allows you to assign or modify a master or user password
for hard drives.
Secure Boot Configuration (Windows 8 only)
• Legacy Support (enable/disable)
• Secure Boot (enable/disable).
• Key Management (enable/disable)
• Fast Boot (enable/disable)
Power OS Power Management - Allows you to enable/disable Runtime Power Man-
agement, Idle Power Savings.
Hardware Power Management - Enable/disable SATA power management, S5 maxi-
mum power savings., PCI slots, network controller, USB 3.0 controller
Thermal - Control minimum fan speed.
HP ProDesk 600 G1 Desktop Mini
• Chassis serial number
• Asset tracking number
• System board ID
• System board CT Number
• BIOS
756963-001
Advanced Power-On Options - Allows you to set:
• POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days)
• POST messages (enable/disable)
• Press the ESC key for Startup Menu (enable/disable)
• Option ROM Prompt (enable/disable)
• After Power Loss (off/on/previous state)
• POST Delay (none, 5, 10, 15, 20, or 60 seconds)
• Remote Wakeup Boot Source (remote server/local hard drive)
• Factory Recovery Boot Support (enable/disable)
• Bypass F1 Prompt on Configuration Changes (enable/disable)
• POST Memory Manager Runtime Allocation (enable/disable).
BIOS Power-On - Set the computer to turn on at a preset time.
Bus Options - Allows you to enable/disable PCI SERR# Generation and PCI VGA
palette snooping.
Onboard Devices - Allows you to set resources for or disable on-board system
devices.
Device Options - Allows you to set:
• Num Lock State at Power-on (off/on)
• Internal Speaker (enable/disable)
• Multi-Processor (enable/disable)
• USB Charging Port (enable/disable)
• USB 3.0 BIOS Driver Support
• Hyper-threading
Management Operations - Allows you to set:
• AMT (disable/enable)
• Unconfigure AMT/ME (enable/disable)
• Hide Unconfigure ME Confirmation Prompt (enable/disable)
• Watchdog Timer (enable/disable)
Option ROM Launch Policy - Allows you to set:
• PXE Option ROMs (UEFI Only/Do Not Launch)
• Storage Option ROMs (UEFI Only/Do Not Launch)
• Video Option ROMs (UEFI Only/Do Not Launch)
Connected BIOS - Lets you configure a proxy server from which to get updates
to the BIOS.
Update BIOS via Network - Lets you update the BIOS over a network.
Ethernet Connection - provides information about the network connection.
page 3