The Following Fault Message Appears In The Display And The Program Has Been Canceled - Miele W3038 Operating And Installation Instructions

Frequently asked questions
The following fault message appears in the display and the
program has been canceled
Problem

Fault Drain Check
drain

Fault Water inlet
Open water faucet

Waterproof system
activated

Technical fault Call
Technical Service
To turn the fault message off: Open the drum door or press the Cancel button until
the fault message goes out.
36
Possible cause and solution
The drain is blocked.
The drain hose is too high.
 Clean the drain filter and the drain pump.
 The maximum drain pump height is 3 ft (1m).
The water inlet is blocked or restricted.
 Check whether the water supply is turned on
properly.
 Check whether the inlet hose is kinked.
The filter in the water inlet is blocked.
 Clean the filter.
The waterproof system has activated.
 Turn off the water supply.
 Call Technical Service
There is a fault.
 Restart the program.
If the fault message appears again contact
Technical Service.