Information List - Siemens SIPROTEC 7SD80 Manual

Operation Using the System Interface
Switchgear can be controlled via the serial system interface and a connection to the substation control equip-
ment. For that it is necessary that the required periphery is physically existing in the device as well as in the
substation. Furthermore, certain settings for the serial interface need to be made in the device (see
SIPROTEC 4 System Description).

2.18.1.2 Information List

No. Information
- 52Breaker
- 52Breaker
- Disc.Swit.
- Disc.Swit.
- GndSwit.
- GndSwit.
- 52 Open
- 52 Close
- Disc.Open
- Disc.Close
- GndSw Open
- GndSw Cl.
- Q2 Op/Cl
- Q2 Op/Cl
- Q9 Op/Cl
- Q9 Op/Cl
- Fan ON/OFF
- Fan ON/OFF
31000 Q0 OpCnt=
31001 Q1 OpCnt=
31002 Q2 OpCnt=
31008 Q8 OpCnt=
31009 Q9 OpCnt=
SIPROTEC, 7SD80, Manual
E50417-G1140-C474-A1, Release date 09.2011
Type of In-
formation
CF_D12 52 Breaker
DP 52 Breaker
CF_D2 Disconnect Switch
DP Disconnect Switch
CF_D2 Ground Switch
DP Ground Switch
IntSP Interlocking: 52 Open
IntSP Interlocking: 52 Close
IntSP Interlocking: Disconnect switch Open
IntSP Interlocking: Disconnect switch Close
IntSP Interlocking: Ground switch Open
IntSP Interlocking: Ground switch Close
CF_D2 Q2 Open/Close
DP Q2 Open/Close
CF_D2 Q9 Open/Close
DP Q9 Open/Close
CF_D2 Fan ON/OFF
DP Fan ON/OFF
VI Q0 operationcounter=
VI Q1 operationcounter=
VI Q2 operationcounter=
VI Q8 operationcounter=
VI Q9 operationcounter=
Functions
2.18 Breaker Control
Comments
215