Configuring And Using Hotkeys - HP 830 Series Configuration Manual

If you press Tab after entering part of an alias, the keyword is displayed.
•
• If a string you entered partially matches a keyword and an alias, the command indicated by the
alias is executed. To execute the command indicated by the keyword, enter the complete keyword.
If you enter a string that partially matches multiple aliases, the system prompts you to select a
•
specific alias.
Configuration procedure
To configure a command keyword alias:
Step
1. Enter system view.
2. Enable the command
keyword alias function.
3. Configure a command
keyword alias.

Configuring and using hotkeys

The system defines the hotkeys shown in
Pressing a command hotkey is the same as entering a command.
To configure a command hotkey:
Step
1. Enter system view.
2. Configure hotkeys.
3. Display hotkeys.
The hotkeys in
you are using to interact with the device, the terminal software definition takes effect.
Command
system-view
command-alias enable
command-alias mapping
cmdkey alias
Command
system-view
hotkey { CTRL_G | CTRL_L |
CTRL_O | CTRL_T | CTRL_U }
command
display hotkey [ | { begin |
exclude | include }
regular-expression ]
Table 3 are defined by the device. If a hotkey is also defined by the terminal software that
Remarks
N/A
By default, the command keyword alias
function is disabled, and you can
configure command keyword aliases but
they do not take effect.
By default, no command keyword alias is
configured.
You must enter the cmdkey and alias
arguments in their complete form.
Table 3 and provides five configurable command hotkeys.
Remarks
N/A
By default:
•
•
•
•
Optional.
Available in any view. See
hotkeys reserved by the system.
6
Ctrl+G is assigned the display
current-configuration command.
Ctrl+L is assigned the display ip
routing-table command.
Ctrl+O is assigned the undo debugging
all command.
No command is assigned to Ctrl+T or
Ctrl+U.
Table 3 for