GE GNE26GGDABB Owner's Manual page 24

Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
r_ REMOVE THEREFRIGERATOR D OORS
Securely tape the door shut with masking tape or have a
second person support the door.
[A'] Start with left-hand door first: Remove the hinge
cover on top of the refrigerator door by removing
all hex screws and pulling it up.
E] Disconnect both electrical connectors at the
top cover.
r_ Remove the 1/4" hex head screw to disconnect the
ground wire from the hinge.
Remove the 1/4" hex head screw to remove the strain
relief from the water line.
Ground
J'_ screw
Strain
REMOVE THE REFRIGERATOR D OORS(cant)
r_ Disconnect the water line from the back of the unit by
pressing down on the dark grey collar while pulling up
on the water line.
Pull waterline through case conduit from the top to frec
the line for door removal. The water line is more than 4'
long and may need to be taped to Door for accessibility
when reinstalling.
/
[E]using a 3/8" socket ratchet/driver, remove the screws
securing the top hinge to the cabinet,
then lift the hinge straight up to free the hinge pin from
the location in the top of the door.
Lifting Hazard. Single person lift could cause injury.
Use assistance when handling, moving or lifting the
refrigerator doors.
Note: when removing door, to prevent damage to door
and electronics, carefully place the door in a proper
location.
Note:The lower door hinge pin and hinge are keyed and must
be matched correctly for the door to self close properly. Please
follow the directions carefully.
24