Installation Instructions; Refrigerator - GE GNE26GGDABB Owner's Manual

Installation
Instructions
Refrigerator
GE and GE Profile
TM
models
Questions? Call 800.GE.CARES (800.432.2737)or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IH PORTANT - save t hese instructions forlocal
inspector's use.
• IMPORTANT - Observe all
g overning
codes and
ordinances.
• Note to Installer - Be sure to leave these instructions with
the Consumer.
• Note to Consumer - Keep these instructions for future
reference.
• Skilllevel- Installation of this appliance requires basic
mechanical skills.
• Completion time - Refrigerator Installation can vary
Water Line Installation 50 minutes
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered
under the Warranty.
PREPARATION
HOVING THE REFRIGERATORINDOORS
If the refrigerator will not fit through a doorway,
the refrigerator door and freezer drawer can be removed.
• To remove the refrigerator door, see the Installing
the Refrigeratorsection.
• To remove the freezer drawer, see the Removing
the FreezerDrawer section.
WATER SUPPLY TO THE ICE HAKER AND DISPENSER
If the refrigerator has an ice maker, it will have to be
connected to a cold water line.AGE water supply kit
(containing tubing, shutoff valve, fittings and instructions)
is available at extra cost from your dealer, by visiting
our website at GEAppliances.com (in Canada at www.
GEAppliances.ca) or from Parts and Accessories,
800.626.2002 (in Canada 1.800.661.1616).
TOOLS YOU MAY NEED
Adjustable Wrench
3,/_" Socket Ratchet/Driver
0@
1/4" Outer Diameter
Compression Nut
and Ferrule (sleeve)
Phillips-Head Screwdriver
!/8% s/s2", !/4" & s/s2"
Allen Wrenches
Flat-Head Screwdriver
!/8" Drill Bit and
Electric or Hand Drill
Pencil
Pliers
Tape Heasure
1/4" Nut Driver
Level
Torx T20, T25
21