Keeping Child Seats In Place (Alr/Elr*) - Volvo S40 2001 Owner's Manual

2001 Volvo S40 & V 40
· Make sure the child restraint system is approved for the child's height, weight and development the
label required by the standard or regulation, or instructions for infant restraints, typically provide this
information.
· In using any child restraint system, we urge you to look carefully over the instructions that are
provided with the restraint. Be sure you understand them and can use the device properly and
safely in this vehicle. A misused child restraint system can result in increased injuries for both the
infant or child and other occupants in the vehicle.
· If your child restraint requires a top tether strap, consult your authorized Volvo retailer for top tether
anchorage and installation information.
When a child has outgrown the child safety seat, you should use the rear seat with the standard seat belt
fastened. The best way to help protect the child here is to place the child on the integrated booster
cushion so that the seat belt is properly located on the hips (see

Keeping child seats in place (ALR/ELR*)

To make child seat installation easier, each seat belt (except for the driver's belt) is equipped with a
locking mechanism to help keep the seat belt taut.
When attaching the seat belt to a child seat:
· Attach the seat belt to the child seat according to the child seat manufacturer's instructions.
· Pull the seat belt out as far as possible.
· Insert the seat belt latch plate into the buckle(lock) in the usual way.
· Release the seat belt and pull it taut around the child seat.
A sound from the seat belt retractor will be audible at this time and is normal.
The belt will now be locked in place.
This function is automatically disabled when the seat belt is unlocked and the belt is retracted.
file:///K|/ownersdocs/2001/2001_SV40/01sv40_01b.htm (12 of 14)12/30/2006 3:49:10 PM
page 11)