Before You Begin; Tools And Parts Needed; Parts Included; Appliance Dimensions - Bosch HUI54451UC Installation Instructions Manual

appliance must agree with the electrical installation (see
rating plate).
The appliance complies with protective class I and may
only be operated with a PE conductor connection.
The installation must contain a disconnector with a
contact opening of at least
poles from the mains. It must still be accessible after
installation.

Before You Begin

Tools and Parts Needed

Measuring tape
▯
Pin
▯
Phillips screwdriver (Posidrive) #2
▯
Drill with the following bits:
▯
Spirit level
▯
Aluminum tape (DO NOT use insulating tape)
▯
Exhaust air duct (configuration depends on the
▯
installation situation)
Additional sheet metal screws (if necessary for
▯
installation of the exhaust air duct)
Jigsaw
▯

Parts Included

8
" (3 mm) that isolates all
X
/ " (5 mm)
3
16
Only an electrical specialist may lay or replace the
connecting lead, paying attention to the applicable
regulations.
If the mains connecting lead of this appliance is
damaged, it must be replaced with a special connecting
lead, which is obtainable from the manufacturer or the
manufacturer's after-sales service.

Appliance dimensions