Wi-Fi Network Connections; Turning Wi-Fi Networking On Or Off; Connecting To A Wi-Fi Network; Adding A Wi-Fi Network - Honeywell dolphin 75e User Manual

Wi-Fi Network Connections

Turning Wi-Fi Networking On or Off

1. Touch All Apps
2. Touch the Wi-Fi switch button to turn the radio Off

Connecting to a Wi-Fi Network

1. Touch All Apps
2. Verify the Wi-Fi is turned On
The terminal searches for available Wi-Fi access points within range of the device and lists them on the screen. If the
terminal previously connected to a Wi-Fi network, it automatically reconnects to the same network.
3. Touch the network name you want to connect to from the available network list that appears. See
Network if the network name does not appear in the available network list.
4. If the network is secured, a dialog box appears requesting information relevant to the network security protocol (e.g.,
password, key, or certificate). Enter the required information.
5. Touch Connect.
Note: To remove a Wi-Fi network the terminal previously connected to, touch the network name, and then touch Forget, to
delete the stored network information.

Adding a Wi-Fi Network

If a Wi-Fi network does not automatically appear in the available network search list, you can manually add it.
1. Touch All Apps
2. Verify the Wi-Fi is turned On
3. Touch the three dots
4. Select Add network.
5. Enter the Network SSID (Wi-Fi network name).
6. For secure Wi-Fi network connections, touch None under Security to open the available network security protocols.
7. Select the type of security protocol required for the network (e.g., WEP, WPA/WPA2 PSK or 802.1xEAP).
Proxy and IP settings can only be configured after the network has been added using the modify the network settings
option.
8. Enter any additional security information required by the type of security protocol selected.
9. Touch Save.

Configuring Proxy Settings for a Wi-Fi Network

If you need to connect to network resources through a proxy server, you can configure settings for the proxy server for each
Wi-Fi network you add. By default, the Wi-Fi networks you add are not configured to connect through a proxy server.
Note: Proxy settings apply only to the Wi-Fi network you modify. You must change proxy settings for each network requiring
a proxy server.
6 - 2
> Settings > Wi-Fi.
> Settings > Wi-Fi.
.
> Settings > Wi-Fi.
.
in the upper right corner of the screen.
or On .
Adding a Wi-Fi