Advertisement
DISASSEMBLY AND CLEAN THE PARTS
7. Disassembly and clean of temperature-variable compartment
• Pull the drawer of temperature-variable compartment to full
extension;
• Lift rear side of the drawer, move 20~30mm toward rear side
of the Refrigerator and lift the front side to take out the drawer;
• Rinse the drawer, and wipe with a dry and soft cloth;
• Assemble the drawer in reverse order.
8. Disassembly and clean of the freezer drawer
• Pull the drawer of freezer to full extension, take out the upper
drawer, and then lift exterior of the whole drawer;
• Lift it and pull out lightly, and then lift and take out the white
plastic drawer;
•
Rinse the drawer, and wipe with a dry and soft cloth;
•
Assemble the drawer of freezer in reverse order.
Note:
When assembling the whole drawer, roller of the drawer is
under that of the Refrigerator body;
Please pay attention to direction when assembling the upper
drawer of freezer. If the drawer is installed reversely, it can't
be closed.
9. Clean of door and door seal
• Wipe with a soft cloth dipped with neutral detergent, and then dry with a clean and soft
cloth;
• If doors and door seals of the Refrigerator are dirty, they are liable to become aging
and be damaged; doors may not be closed properly; and cold air may leak. Thus, they
should keep clean.
10. Safety inspection after cleaning
• If the power plug is inserted into the socket firmly?
• Is the power cord cracked or scratched?
• If the power plug gives out heat abnormally?
operating _23
Advertisement
