Troubleshooting
PROBLEM
IR sensor
inoperative
Disc won't play
Play starts,
but then stops
immediately
No sound or
distorted sound
24
SOLUTION
•
Verify that the batteries in the remote are fresh.
•
Verify that the remote sensor eye is not
obstructed.
• Insert a disc with the label side facing up.
• Check the type of disc you put into disc tray.
This DVD only plays DVDs, audio CDs and
MP3s.
• Both the unit and the disc are coded by region.
If the regional codes don't match, the disc can't
be played. This DVD player is set to Region
Number 1.
• The disc is dirty. Clean it.
• Condensation has formed. Allow
player to dry out.
•
Make sure your DVD is connected properly.
Make sure all cables are securely inserted
into the appropriate jacks.
•
If you are using the IR headphones, make
sure you turn on the IR headphone power.
•
Make sure the Modulator is ON and the proper
Frequency has been selected.
MMD85