Table of Contents
Advertisement
(2) Standard wireless remote controller
• Press the remote control unit test run button while the air condi-
tioner is running.
• At the end of test running, press the remote control unit start-
stop button (Fig. 22).
Operation can be checked by lighting and flashing of the display
section OPERATION and TIMER lamps.
Perform judgement in accordance with the following.
11. AN ERROR DISPLAY
(1) Run the air conditioner in accordance with the operating manual.
(2) Operation can be checked by lighting and flashing of the grille display section OPERATION and TIMER lamps.
(3) Perform judgment in accordance with the following.
• Test running
When the air conditioner is run by pressing the remote controller test run button, the OPERATION and TIMER lamps flash slowly at
the same time.
• Error
The OPERATION and TIMER lamps operate as follows (Table 10) according to the error contents.
Fig. 23
SWING
TIMER OPERATION
SWING LAMP
TIMER LAMP
(Orange)
(Green)
En-14
Fig. 22
MANUAL
AUTO
OPERATION LAMP
(Red)
START/STOP button
START
STOP
TEST RUN button
A B C D
Advertisement
Table of Contents
