Connecting Output Terminals; Connecting To The Control Panel - Pioneer DJM-900NXS2 Operating Instructions Manual

Connecting output terminals

External effector
1 Also connect the external effector to the [RETURN] terminal (input terminal).
2 Be sure to use the [MASTER1] terminals only for a balanced output. Connection with an unbalanced input (such as RCA) using an XLR to RCA
converter cable (or converter adapter), etc., may lower the sound quality and/or result in noise.
For connection with an unbalanced input (such as RCA), use the [MASTER2] terminals.
3 Be careful not to accidentally insert the power cord of another unit to [MASTER1] terminal.

Connecting to the control panel

USB port covers
1
A
1 Do not push or pull hard on a USB port cover. It could be damaged.
10
En
Power amplifier Power amplifier
2
1
Computer
Connect using USB cables.
USB hubs cannot be used.
USB
DIGITAL LINE DIGITAL LINE
A B PHONO A B
RETURN
AUX
TRIM
CLIP DECK 3/C CLIP
B
MIDI
ON/OFF
0
PHONES
A
Headphones
3
L R L R
Analog input
2
recording device
DIGITAL LINE DIGITAL LINE
PHONO A B PHONO A B
RETURN RETURN
AUX AUX
TRIM TRIM TRIM
DECK 1/A CLIP DECK 2/B CLIP
CROSS FADER ASSIGN
B
Digital audio
Power amplifier
input device
(for booth monitor)
Mobile device
SEND / RETURN
MASTER
LEVEL
PHONO
RETURN
AUX
0
ON / OFF
DECK 4/D CLIP LEVEL
MIN MAX
ON / OFF
USB port covers
1